Back to Calculators List
Open Calculator

Binary Distillation with the McCabe-Thiele Method

Fundamentals of Binary Distillation

Distillation separates two chemical components based on differences in volatility or boiling point. In McCabe-Thiele column design, you specify the feed composition (xF), distillate composition (xD), and bottoms composition (xB), together with feed thermal condition (q) and reflux ratio (R), to determine theoretical stage counts and feed tray location. The core assumptions are:

  • Constant Molar Overflow (CMO): molar heats of vaporization of both components are nearly equal, the column is adiabatic, and heats of mixing are negligible, keeping liquid and vapor molar flow rates constant in each section;
  • Phase equilibrium on every theoretical stage: vapor and liquid streams leaving each tray are in equilibrium, meaning each mole of vaporized liquid balances one mole of condensed vapor; and
  • No chemical reaction occurs during separation and pressure drop along the column is negligible.

Binary distillation equilibrium curves can be derived from Raoult's Law, which you can study and compute in the VLE explanation & calculator page.

McCabe-Thiele Diagram

The main curves forming the stage-stepping construction on a McCabe-Thiele diagram include:

x-y Diagram

The x-y diagram plots vapor mole fraction of the lighter component (y) against liquid mole fraction (x) at constant operating pressure. When relative volatility (α) approaches 1, separation becomes difficult as the equilibrium curve approaches the diagonal line y = x, requiring more stages. Relative volatility is defined as:

α = (yi / xi) / (yj / xj)

Where y is vapor mole fraction, x is liquid mole fraction, and i, j denote the mixture components. For a binary system (xj = 1 - xi and yj = 1 - yi), this reduces to:

α = (yi / xi) / [ (1 - yi) / (1 - xi) ]

Operating Lines & Feed Line (q-line)

Operating lines arise from section material balances relating counter-current liquid and vapor compositions (L/V slope). The rectifying operating line (ROL) applies above the feed tray toward the condenser, the stripping operating line (SOL) applies below the feed tray toward the reboiler, and both intersect on the feed thermal-condition line (q-line).

References

  1. McCabe, W. L., Harriott, P., & Smith, J. C. (2004). Unit Operations of Chemical Engineering (7th ed.). McGraw-Hill.
  2. Geankoplis, C. J., Hersel, A. A., & Lepek, D. H. (2018). Transport Processes and Separation Process Principles (5th ed.). Prentice Hall.

Ready to design your distillation column? Launch the interactive calculator now.

Open Calculator
Found a bug or calculation discrepancy? Report to technology@torche.app
© 2026 Torche Education.Timezone: Asia/Jakarta (WIB) • Currency: Indonesian Rupiah (IDR)
Loading session...