Back to Calculators List
Open Calculator

Bubble Point, Dew Point, and Flash Calculations

To calculate initial boiling points (bubble point), condensation points (dew point), and vapor fractions in flash separation, apply Raoult's Law for ideal mixtures as summarized below.

Raoult's Law

Raoult's Law states that the partial pressure of each component in the vapor phase equals the product of its liquid-phase mole fraction and the pure-component saturated vapor pressure at the system temperature. Two core assumptions apply:

  • Ideal gas vapor phase, making the model most accurate at low to moderate pressures; and
  • Ideal solution liquid phase, meaning intermolecular forces among components are similar due to comparable chemical structures (e.g., alkane hydrocarbon mixtures).

Mathematically, Raoult's Law is expressed as:

yi · P = xi · Pisat   (i = 1, 2, ..., N)

Where xi is liquid mole fraction of component i, yi is vapor mole fraction of component i, P is system pressure, and Pisat is the pure saturation pressure of component i at temperature T from the Antoine Equation:

ln Pisat = A - [ B / (T + C) ]

With A, B, and C as the component's Antoine constants. Ensure pressure (P) and temperature (T) units as well as logarithm base (ln vs. log10) match the Antoine parameter table being used.

Bubble Point, Dew Point, and Flash Calculations with Raoult's Law

The VLE calculator solves five vapor-liquid equilibrium cases:

BUBBLE P:Find bubble pressure (P) and {yi} from liquid composition {xi} and T
DEW P:Find dew pressure (P) and {xi} from vapor composition {yi} and T
BUBBLE T:Find bubble temperature (T) and {yi} from liquid composition {xi} and P
DEW T:Find dew temperature (T) and {xi} from vapor composition {yi} and P
P-T FLASH:Find vaporized fraction as well as {xi} and {yi} from feed {zi} in the two-phase zone at P and T

For bubble point calculations where vapor composition is unknown, applying Σ yi = 1 simplifies Raoult's Law to:

P = Σi ( xi · Pisat )

For dew point calculations, applying Σ xi = 1 to unknown liquid composition yields:

P = 1 / [ Σi ( yi / Pisat ) ]

For flash separation, phase compositions come from the overall component material balance:

zi = V · yi + L · xi

Where zi is feed mole fraction, V is vapor fraction, and L is liquid fraction (L = 1 - V). Flash calculation cannot run when the feed lies in the subcooled liquid or superheated vapor region.

References

  1. Smith, J. M., Van Ness, H. C., Abbott, M. M., & Swihart, M. T. (2018). Introduction to Chemical Engineering Thermodynamics (8th ed.). McGraw-Hill.

Worked Example

"Calculate the flash separation of a mixture containing 15 mol water, 12 mol methanol, 22 mol ethanol, 36 mol propanol, and 15 mol acetone at 1 bar and 50 °C."

Ready to calculate phase equilibria? Launch the interactive calculator now.

Open Calculator
Found a bug or calculation discrepancy? Report to technology@torche.app
© 2026 Torche Education.Timezone: Asia/Jakarta (WIB) • Currency: Indonesian Rupiah (IDR)
Loading session...